5 Installation Procedure
22
YASKAWA ELECTRIC
TOBP C730600 56A 1000-Series Option SI-W3 Installation Guide
8.
After wiring the terminal block, recheck the option wire routing performed in step
9.
Replace and secure the front covers of the drive (C, F) and replace the digital
operator (D).
Figure 11
Figure 11 Replace the Front Covers and Digital Operator
Note:
Take proper precautions when wiring the option so that the front covers will easily fit back onto
the drive. Make sure no cables are pinched between the front covers and the drive when
replacing the covers.
10.
Set drive parameters in
for proper option performance.
◆
Wiring Specifications
Use only the LONWORKS network cables.
Refer to the Echelon web site for more information on network cabling (www.echelon.com).
The performance cannot be guaranteed when using the cables other than LONWORKS
network cables.
Separate the LONWORKS cables from the wiring to the main circuit and other lines.
F
C
D
TOBP_C730600_56A_0_0_E.fm 22 ページ ２０１１年１１月２日 水曜日 午後６時１０分
Summary of Contents for LonWorks SI-W3
Page 1: ......
Page 39: ...This Page Intentionally Blank ...
Page 41: ...This Page Intentionally Blank ...
