YASKAWA LA500, Technical Manual

Page: 357 / 376

Parameter
Details
12
12.9 o: Keypad-Related Settings
YASKAWA SIEPYEULA5001C LA500 Technical Manual 357
■
o4-22: Time Format
No.
(Hex.)
Name Description
Default
(Range)
o4-22
(154F)
RUN
Expert
Time Format
Sets the time display format. This parameter is only available when using an LCD keypad.
0
(0 - 2)
Sets the display of the time shown in the upper-left of the LCD keypad screen.
0 : 24 Hour Clock
1 : 12 Hour Clock
2 : 12 Hour JP Clock
■
o4-23: Date Format
No.
(Hex.)
Name Description
Default
(Range)
o4-23
(1550)
RUN
Expert
Date Format
Sets the date display format. This parameter is only available when using an LCD keypad.
0
(0 - 2)
Sets the date format that the drive uses for the fault history and other records.
0 : YYYY/MM/DD
1 : DD/MM/YYYY
2 : MM/DD/YYYY
■
o4-24: bAT Detection Selection
No.
(Hex.)
Name Description
Default
(Range)
o4-24
(310F)
RUN
Expert
bAT Detection Selection
Sets the operation when the drive detects bAT [Keypad Battery Low Voltage] and TiM [Keypad
Time Not Set] . This parameter is only available when you use an LCD keypad.
0
(0 - 2)
0 : Disable
The drive will not detect bAT or TiM .
1 : Enable (Alarm Detected)
The keypad shows bAT or TiM and the drive continues operation. The output terminal set to Alarm [H2-01 to H2-
03 = 10] activates.
2 : Enable (Fault Detected)
The output turns off and the motor coasts to stop. The output terminal set for Fault [H2-01 to H2-03 = E]
activates.
◆
o5: Log Function
The data log function saves drive status information as a CSV file in the microSD memory card in the keypad.
Monitors
Ux-xx are the source of data log information. You can record a maximum of 10 monitors.
Change the LCD keypad screen from the main menu to the Diagnostic Tools screen and select the data log
function. Set the number of the monitor to record and the sampling time, then start to record the data log.
Table 12.14 Setting Parameters for Data Log Items
No. Name Default Data Log Monitors
o5-03 Log Monitor Data 1 101 U1-01 [Frequency Reference]
o5-04 Log Monitor Data 2 102 U1-02 [Output Frequency]
o5-05 Log Monitor Data 3 103 U1-03 [Output Current]
o5-06 Log Monitor Data 4 107 U1-07 [DC Bus Voltage]
o5-07 Log Monitor Data 5 108 U1-08 [Output Power]
V/f OLV
V/f OLV
V/f OLV