4 Component Names and Functions
10
YASKAWA
TOEP C730600 74D LED Keypad Installation Manual
-
Key and LED
Function
E
LED Display
Panel
Displays data, parameters, and errors.
Note:
This manual uses radiating triangles to show flashing
digital characters on the keypad as in this figure:
F
LO/RE LED
Illuminates to identify when the drive is operating in
LOCAL Mode.
G
LO/RE
Selection Key
Switches drive control for the Run command and frequency
reference between the keypad (LOCAL) and an external
source (REMOTE).
Note:
•
The drive will not switch between LOCAL Mode and
REMOTE Mode when it is receiving a Run command
from an external source.
•
Stop operation to enable the LO/RE Selection Key
when in Drive Mode. Set
o2-01 = 0 [LO/RE Key
Function Selection = Disabled]
to disable
when switching from REMOTE to LOCAL will have
a negative effect on system performance.
H
STOP Key
Stops drive operation.
Note:
Push
to stop the motor. This will also apply
when a Run command (REMOTE Mode) is active at an
external Run command source. Set
o2-02 = 0 [STOP
Key Function Selection = Disabled]
to disable
in REMOTE Mode.
I
RUN Key
Starts the drive in LOCAL Mode.
Note:
Push the LO/RE Selection Key on the keypad to set the
drive to LOCAL Mode before you use the keypad to
operate the motor.
