1 Preface and Safety
YASKAWA ELECTRIC
TOBP C730600 35B YASKAWA AC Drive Option LED Operator Installation Manual
5
◆
Applicable Documentation
The following manuals are available for the JVOP-182 LED Operator Option:
For the drive setup, refer to the drive Quick Start Guide or Technical Manual.
LED Operator
Yaskawa AC Drive Option LED Operator Installation Manual
Read this manual first.
The installation manual is packaged with the LED Operator Option and
contains a basic overview of wiring, settings, functions, and fault
diagnoses.
RS-232C Interface Option
Yaskawa AC Drive -RS-232C Interface Option Technical Manual
The Technical Manual is packaged with the RS-232C Interface Option and
contains a basic overview of wiring, settings, functions, and fault diagnoses.
Yaskawa Drive
Refer to the manual of the drive this option is being used with.
The manual for the drive covers basic installation, wiring, operation procedures, functions,
troubleshooting, and maintenance information.
It also includes important information on parameter settings and how to tune the drive.
To obtain instruction manuals for Yaskawa products access these sites:
Europe:
http://www.yaskawa.eu.com
Japan:
http://www.e-mechatronics.com
Other areas:
contact a Yaskawa representative.
J1000
J1000
STOP
Read manual before installing.
Wait 1 minute for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
1
2
3
4
5
:
:
:
:
:
:
:
:
:
6
7
8
9
据え付け、運転の前には必ず取扱説明書を読むこと。
通電中および電源遮断後
外さないこと。
級インバータの場合は、電源の中性点が接地
されていることを確認すること。（ 対応）
周波数指令
正転逆転選択
出力周波数
出力電流
出力電圧
モニタ
ベリファイ
セットアップ
パラメータ設定
400V
けが、感電のおそれがあります。
危 険
1
分以内はフロントカバーを
