2.11 o: Keypad-Related Settings
416
YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
◆
o2: Keypad Operation
■
o2-02: OFF Key Function Selection
No.
(Hex.)
Name
Description
Default
(Range)
o2-02
(0506)
OFF Key Function Selection
Sets the function to use
on the keypad to stop the drive when the Run command source for
the drive is REMOTE (external) and not assigned to the keypad.
1
(0, 1)
0 : Disabled
1 : Enabled
stays enabled when the Run command source is not assigned to the keypad.
To start the drive again after you push
to stop operation, turn the external Run command OFF and ON again.
■
o2-03: User Parameter Default Value
No.
(Hex.)
Name
Description
Default
(Range)
o2-03
(0507)
User Parameter Default
Value
Sets the function to keep the settings of changed parameters as user parameter defaults to use during
initialization.
0
(0 - 2)
When you set
o2-03 = 1 [Set defaults]
, the drive saves changed parameter settings as user parameter setting values in
a part of the memory that is isolated from drive parameters.
When you set
A1-03 = 1110 [Initialize Parameters = User Initialization]
to initialize the drive, the drive resets the
internal parameter setting values to those user parameter setting values.
0 : No change
1 : Set defaults
Saves changed parameter setting values as user default settings.
Set
o2-03 = 1
then push
to save the user parameter setting values. After the drive saves the setting value,
o2-03
automatically resets to
0
.
2 : Clear all
Deletes all of the saved user parameter setting values.
Set
o2-03 = 2
then push
to clear the user parameter setting values. The drive will automatically reset
o2-03
to
0
. If
you delete the user parameter setting values, you cannot set
A1-03 = 1110
to initialize parameters.
■
o2-04: Drive Model (KVA) Selection
No.
(Hex.)
Name
Description
Default
(Range)
o2-04
(0508)
Drive Model (KVA)
Selection
Sets the Drive Model code. Set this parameter after you replace the control board.
Determined by the drive
(-)
NOTICE:
Set o2-04 [Drive Model Selection] correctly. If you set this parameter incorrectly, it will decrease drive performance, cause
the protection function to operate incorrectly, and cause damage to the drive.
Note:
When the setting value of
o2-04
changes, related parameter setting values also change. Refer to
Defaults by o2-04 [Drive Model (kVA)
for more information.
These tables list the relation between
o2-04
setting values and drive models.
o2-04 Setting
Drive Model
65
2011
67
2017
o2-04 Setting
Drive Model
68
2024
6A
2031
V/f
OLV/PM
OLV/PM
EZOLV
V/f
OLV/PM
OLV/PM
EZOLV
V/f
OLV/PM
OLV/PM
EZOLV
