YASKAWA
SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
145
3.
Push
or
to select [User Custom Parameters], then push
.
4.
Push
or
to show the parameter to examine.
5.
To change the parameter settings, push
or
to select the parameter, then push
.
6.
Push
or
to select the digit, then push
or
to change the value.
7.
Change the value, push
.
The parameter setting procedure is complete.
◆
Save a Backup of Parameters
You can save a backup of the drive parameters to the keypad. The keypad can store parameter setting values for a
maximum of four drives in different storage areas. Backups of the parameter settings can save time when you set
parameters after you replace a drive. When you set up more than one drive, you can copy the parameter settings from
a drive that completed a test run to the other drives.
Note:
•
Stop the motor before you back up parameters.
•
The drive will not accept a Run command while it makes a backup.
Summary of Contents for H6B1A002
