YASKAWA
TOEPC7106171FD FP605 DRIVE INSTALLATION & PRIMARY OPERATION
89
Table 13.1 Harmonized Standard
European Directive
Harmonized Standard
Low Voltage Directive
2014/35/EU
EN 61800-5-1:2007
EMC Directive
2014/30/EU
EN 61800-3:2004/A1:2012
First environment restricted distribution
Machinery Directive
2006/42/EC
•
EN ISO 13849-1:2015 (Cat. 3, PL e)
•
EN 62061:2005/A2:2015 (SIL CL3)
•
EN 61800-5-2:2007 (SIL3)
•
EN IEC 63000:2018
*1
Refer to EU Declaration of Conformity for the latest information about the harmonized standard.
The customer must display the CE Mark on the final device containing this product. Customers must verify that the
final device complies with EU standards.
◆
EU Declaration of Conformity
Go to
and search for
“
EU Declaration of Conformity
”
to get an original copy of the EU
Declaration of Conformity.
Yaskawa declares that this product complies with the following directives and standards at our sole responsibility.
◆
CE Low Voltage Directive Compliance
It has been confirmed that this product complies with the CE Low Voltage Directive by conducting a test according to
IEC/EN 61800-5-1.
The following conditions must be satisfied for machines and devices incorporating this product to comply with the
CE Low Voltage Directive.
■
Area of Use
Install this product in a location with Overvoltage Category III and pollution degree 2 or less.
■
Guarding Against Debris
When you install IP20/UL Open Type drives (model: 2xxxxB, 4xxxxB), use an enclosure panel that does not let
unwanted material enter the drive from above or below.
■
Electrical Installation
Refer to
for an example of a drive that is wired to comply with the CE Low Voltage Directive.
