Page 23
-> Refresh :
Model :
SN :
Firmware :
Server :
Status :
Internet :
Ethernet Status :
Baud Rate :
Modbus ID :
2022-09-16 10:21:32 GMT -6
FA1-C
7012123000203
1.2200
mqtt.solectria.com 1884
Offline
Ethernet
Disconnected
9600 N8 1
1 - 10
FA1-7012123000203
Device Settings
Internet Settings
More
Refresh
Internet Settings Switch
Ethernet
Select the interface as the channel to the Internet,
and configure the corresponding parameters
after switching.
More information - Ethernet
4G
Ethernet Settings Save
Static IP Address
More information - Ethernet
IP Address
Subnet Mask
Gateway Address
Auto DNS
-> Refresh :
Model :
SN :
Firmware :
Server :
Status :
Internet :
Ethernet Status :
Baud Rate :
Modbus ID :
2022-09-16 10:30:32 GMT -6
FA1-C
7012123000203
1.2200
mqtt.solectria.com 1884
Online
Ethernet
Connected
9600 N8 1
1 - 10
FA1-7012123000203
Device Settings
Internet Settings
More
Refresh
Ensuring that the
gateway can connect
to the Internet is the
most important step.
The gateway connects
to the Internet through
4G by default.
if connection to the
Internet via Ethernet is
desired.
select "Ethernet" and
press "Switch".
Enter the correct Ether-
net IP information.
Click “Refresh” to
check for updated
configuration.
if the “Status” is
“Online”, the gateway is
connected to the target
server.
When the gateway
status becomes
“Online”, the gateway
will automatically
create related objects
on the portal, and the
administrator can
remotely set the
required parameters.
In this case, it is
assumed that the SIM
card is inserted into
the gateway.
