E-20
13 Installation Conditions of EMC Directive
To adapt a combination of a SGM
S servomotor and a SGDS SERVOPACK to EMC Direc-
tives (EN55011 group1 classA, EN61000-6-2), the following conditions must be satisfied.
However, because this product is built-in, check that the following conditions are still met after
being installed in the final product.
13.1 EMC Installation Conditions
This section describes the installation conditions that satisfy EMC guidelines for each model
of the SGDS SERVOPACK. The conditions required for the standard type (base mounted)
of SERVOPACK are described. Refer to this section for other SERVOPACK models such
as the rack mounted types as well.
This section describes the EMC installation conditions satisfied in test conditions prepared
by Yaskawa. The actual EMC level may differ depending on the actual system’s configura-
tion, wiring, and other conditions.
