YASKAWA CIPR-GA50C series, Technical Manual

Page: 314 / 766

10.3 Model Specifications (Three-Phase 200 V Class)
314 YASKAWA SIEPC71061753A GA500 Technical Manual
10.3 Model Specifications (Three-Phase 200 V Class)
Table 10.2 Ratings (Three-Phase 200 V Class)
Model 2001 2002 2004 2006
Maximum Applicable Motor Output (kW)
HD
*1
0.1 0.25 0.55 1.1
ND
*2
0.18 0.37 0.75 1.1
Maximum Applicable Motor Output (HP)
HD
*1
1/6 1/4 1/2 1
ND
*2
1/6 1/4 3/4 1.5
Input Rated Input Current (A)
HD 0.7 1.5 2.9 5.8
ND 1.1 1.9 3.9 7.3
Output
Rated Output Capacity
(kVA)
*3
HD 0.3 0.6 1.1 1.9
ND 0.5 0.7 1.3 2.3
Rated Output Current
(A)
HD 0.8 1.6 3.0 5.0
ND 1.2 1.9 3.5 6
Overload Tolerance
•
HD: 150% of the rated output current for 60 seconds. The permitted frequency of overload is
once every 10 minutes.
• ND: 110% of the rated output current for 60 seconds. The permitted frequency of overload is
once every 10 minutes.
Note:
Derating may be necessary for applications that start and stop frequently.
Carrier Frequency
HD: 10 kHz without derating the drive capacity.
ND: 2 kHz without derating the drive capacity.
Derate the drive capacity to use values to 15 kHz maximum.
Maximum Output Voltage
Three-phase 200 V to 240 V
Note:
The maximum output voltage is proportional to the input voltage.
Maximum Output Frequency
• EZOLV: 120 Hz
• AOLV/PM: 270 Hz
• V/f, OLV, OLV/PM: 590 Hz
Measures for
Harmonics
DC reactor External options
Braking Device Braking Transistor Standard internal characteristics
EMC Filter
EMC Filter
IEC61800-3
Factory option
Models 2xxxE: Category C3 (Conducted emission)
Power Supply
Rated Voltage/Rated Frequency
• Three-phase AC power supply 200 V to 240 V at 50/60 Hz
• DC power supply 270 V to 340 V
Permitted Voltage Fluctuation -15% to +10%
Permitted Frequency Fluctuation ±5%
Input Power (kVA)
HD 0.3 0.7 1.3
2.7
ND 0.5 1.2 1.8 3.3
*1 The maximum applicable motor output complies with 208 V motor ratings as specified in NEC Table 430.250. The rated output
current of the drive output amps must be equal to or more than the motor rated current.
*2 The maximum applicable motor output is based on 4-pole, general-purpose 220 V motor ratings. The rated output current of the drive
output amps must be equal to or more than the motor rated current.
*3 The rated output capacity is calculated with a rated output voltage of 220 V.
Table 10.3 Ratings (Three-Phase 200 V Class)
Model
2010 2012 2021 2030 2042 2056 2070 2082
Maximum Applicable
Motor Output (kW)
HD
*1
1.5 2.2 4.0 5.5 7.5 11 15 18.5
ND
*2
2.2 3 5.5 7.5 11 15 18.5 22
Maximum Applicable
Motor Output (HP)
HD
*1
2 3 5 7.5 10 15 20 25
ND
*2
3 4 5 10 10 20 25 30
Input
Rated Input
Current (A)
HD 7.5 11 18.9 24 37 52 68 96
ND 10.8 13.9 24 37 52 68 80 114