3 Receiving
YASKAWA Europe
YEU TOEP C710616 87A - A1000 Option Powerlink - Installation Manual
EN 9
3
Receiving
Please perform the following tasks after receiving the Powerlink Option:
• Inspect the Powerlink Option for damage.
If the Powerlink Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
).
• If you have received the wrong model or the Powerlink Option does not function properly,
contact your supplier.
Contents and Packaging
Table E.2 Option Package Contents
Table E.3 Option Package Contents (continued)
Tool Requirements
A Phillips screwdriver PH1(#1) or PH2(#2) is required to install the Powerlink option.
Note:
Tools required to prepare Powerlink cables for wiring are not listed in this
manual.
Description:
Option Card
Ground Cable
Screws (M3)
Quantity:
1
1
3
Description:
LED Label
Installation Manual
Quantity:
1
1
S/E
MS
L/A 2
L/A 1
MANUAL
