YASKAWA 67K-RRJ0, Manual, Page: 33 / 74

n Set Display
Via ‘Start è Settings è Control Panel è Display’ the dialog windows for the display
properties opens. Here you can change the settings for the monitor options.
n Set Ethernet Parameters
The dialog field for pre-setting an Ethernet address can be found in ‘Start è Settings
è Network and Dial-up Connections’ . The default setting is address assignment via
DHCP.
Please consider with the manual assignment of IP addresses that these
are not identical for both interfaces.
n
System Properties (System)
Via ‘Start è Settings è Control Panel è System’ you receive information about the
version of the current Windows
Ò
operating system, the memory load and sharing
(alterations here are not accepted into the registry) and the copyright. The register
‘Device Name’ allows you to change the device name that is shown during Ethernet
communication for instance.
3.6 Integrated server
3.6.1 General
The Panel PC has several integrated server that enable a remote maintenance within a
network. Some servers only allow access by means of entering User name and Pass-
word . The following login data are used standardly:
User name: wince
Password: vipatp
Per default the following server are integrated:
n ftp server (activated)
n Telnet (activated)
n VNC (not activated)
Phrases that are used in the description of the server:
A client is an application that uses the service of a server within a network. For example,
a web browser is a client because at every call of a website it sends a request to a web
server and receives an answer.
A server is an application that waits for the contact request of a client application and
exchanges messages with it after contact start. This communication type is called Client-
Server communication.
Computer within a network where at least one server is running.
Data transfer Server
®
Client
Login data
Overview
Phrases
Client
Server
Host
Download
HMI
Deployment Panel PC
Integrated server > General
HB160 | PPC | 67K-RRJ0 | en | 22-20 33