YASKAWA 67K-PNL0 Manual Download

Page: 42 / 59

Due to the limited space of the BIOS ROM, the support for legacy USB keyboard (in DOS

mode) is by default set to disabled. With more BIOS ROM space available, it will be able

to support more advanced features as well as provide compatibility to a wide variety of

peripheral devices.

This is a workaround for OSs that does not support EHCI hand-off. The EHCI ownership

change should be claimed by the EHCI driver.

Selects the USB mass storage device’s start unit command timeout (10, 20, 30 or 40 sec-

onds).

This section is used to configure serial ports 0 to 1.

Displays the Super I/O chip used on the board.

This section is used to configure serial port 0.

Enables or disables the serial port.

Disabled - Serial port is not available

Enabled - (default) Serial port is available

Selects an optimal setting for the super IO device.

This field is used to configure the mode of serial port 0 as RS232 (default), RS422,

RS485 or RS485 AUTO.

This section is used to configure serial port 1.

Legacy USB Support

EHCI Hand-off

Device reset time-out

Submenu "Super IO Con-

figuration"

Super IO Chip

Submenu "Serial Port 0

Configuration"

Serial Port

Change Settings

Onboard Serial Port 0

Mode

Submenu "Serial Port 1

Configuration"

VIPA HMI

BIOS setup

Advanced

HB160 | PPC | 67K-PNL0 | en | 20-20

Summary of Contents for 67K-PNL0




























































Search results

Summary of Contents for 67K-PNL0

Reviews:

Related manuals for 67K-PNL0

Brands by name

Popular brands

YASKAWA 67K-PNL0, Manual

Search results

Summary of Contents for 67K-PNL0

Reviews:

Related manuals for 67K-PNL0

Brands by name

Popular brands