2.4 Installation
There is a locking lever at the top side of the terminal module. For
mounting and demounting this locking lever is to be turned upwards
until this engages audible. Now the module may be pulled forward.
For mounting plug the module to the module installed before and
push the module to the mounting rail guided by the strips at the upper
and lower side of the module. The module is fixed to the mounting rail
by pushing downward the locking lever. The modules may either sep-
arately be mounted to the mounting rail or as block. Here is to be con-
sidered that each locking lever is opened.
For the exchange of a electronic module, the electronic module may
be pulled forward after pressing the unlocking lever at the lower side
of the module. For installation plug the electronic module guided by
the strips at the lower side until this engages audible to the terminal
module.
There is the possibility to fix the assignment of electronic and terminal
module. Here coding pins (order number 000-0AC00) from VIPA can
be used. The coding pin consists of a coding jack and a coding plug.
By combining electronic and terminal module with coding pin, the
coding jack remains in the electronic module and the coding plug in
the terminal module. This ensures that after replacing the electronics
module just another electronic module can be plugged with the same
encoding.
Functional principle
Coding
VIPA System SLIO FM 050
Basics and Assembly
Installation
HB300 | FM | 050-1BA00 | GB | 15-11
15
