Yardworks SN70016-1 Owner'S Manual Download Page 14

YARDWORKS WARRANTY POLICY 

OWNER’S MANUAL 

12 AMP 16 INCH SNOW THROWER

Copyright. All Rights Reserved. 

SN70016-1 | SKU # 270-3286 

In a continued commitment to improve quality, the Manufacturer reserves the right 

to make component changes or design changes when necessary. 

Rev. 05/1

8

/2022

2 Year limited warranty

 on all Yardworks power tools from date of purchase

when used for personal, household, or family use.

The Great States Corp. (GSC) warrants to the original owner that this Yardworks product and service part is free from 

defects in materials and workmanship and agrees to repair or replace any defective product or part for the warranty peri-

od as stated above. 

 

Warranty voided if used for commercial or industrial purposes or any other improper use as determined by GSC.

Warranty does not include repairs necessary due to operator

s abuse or negligence (including overloading the product

beyond capacity or immersion in water), or the failure to assemble, operate, maintain or store the product according to

the instructions in the owner

s manual.

This warranty does not cover

Wear items, including but not limited to 

-

 drive belts & gears, tines, cutting blades, mower blades, saw chains,

mulching blades, blower fans, spool covers, trimmer line, blower and vacuum tubes, guide bars, high pressure

hoses, wheels, handles, augers, worn bags, power cables, and other items subject to wear over time.

Wear on batteries, including but not limited to –

 

drops, wear and breakage on charger, exposure to extreme

temperature swings (hot or cold), battery left on charger too long, battery left uncharged for too long, and misuse

or abuse of the battery.

This warranty does not cover damage caused by cold, heat, rain, excessive humidity or other environmental extremes.

This warranty does not cover normal deterioration of the exterior finish or normal wear and tear on the products

including, but not limited to scratches, cracks, dents, or damage caused by outside chemicals.

This warranty is not transferable and only applies to new products sold directly from an authorized retailer. This

warranty does not apply to any product, new or used, purchased through unauthorized third

-

party channels. For

information on authorized dealers, contact our customer support hotline at 1

-

800

-

633

-

1501 (Mon

-

Fri 8am

-

5pm Est)

Any incidental, indirect or consequential loss, damage, or expense that may result from any defect or malfunction of

the products is not covered by the warranty.

The warranty does not include installation, assembly or normal adjustments explained in the operator

s manual. The

expense of delivering the product to the vendor and the expense of returning the product or replacement parts to the

owner is not covered by the warranty.

Additional Warranty Limitations

 

Some states do not allow the exclusion or limitation on how long an implied warranty lasts, so the above limitation may 

not apply to you. Products sold damaged or incomplete, sold 

as is, or sold as reconditioned are not covered under the 

warranty. 

 

Damage or liability caused by shipping, improper handling, improper assembly, incorrect voltage, improper wiring,     

improper maintenance, improper modification or the use of accessories and/or attachments not specifically recommended 

is not covered by this warranty. 

 

Proof of purchase, original dated sales receipt, must accompany all warranty claims.

For claims go to americanlawnmower.com or call our customer support hotline from 8am

-

5pm EST, 

Mon

-

Fri at 1

-

800

-

633

-

1501

 

 

American Lawn Mower Company 

The Great States Corporation   

7444 Shadeland Station Way 

Indianapolis, IN 46256 USA 

Phone 1-800-633-1501     

americanlawnmower.com 

Summary of Contents for SN70016-1















Reviews: