INSTALLATION
3
•
This reel is suitable for installing near a water source.
•
For a large area place it in the centre of the yard or work place, enabling
you to freely cover the area.
•
You can also extend the hose to the most convenient point in this area:
the reel can cover an area of about 40m.
•
The mounting bracket can be installed on a brick wall (Fig.2). There are
many alternative positions in which the unit can be placed. The key point
is subject to what is convenient for the user. The most appropriate position
is to mount it on a wall or post horizontally, approximately 1m above the
ground. Otherwise the reel can be used vertically when hung on a suitable
overhead beam or rafter.
•
When securing the hose reel overhead it is advisable to drill a hole in the
pivot tube and place a lock or bolt in the hole. This will prevent the pivot
tube from slipping out of the mounting bracket and the hose reel falling
from the mounted position.
•
The mounting bracket needs to be secured using four screws and
washers or four bolts (Fig.3) (these are not included). The four holes in
two directions to centre are 132mm and 66mm (Fig.4)
Fig.2
Fig.3
Fig.4
