manualshive.com logo in svg

Yardworks CLM48BCU1, Instruction Manual

Share
Download
Yardworks CLM48BCU1 Instruction Manual Download Page 22

model no. 060-1982-2  |  contact us: 1.866.523.5218

22

Operation

OPERATION  

This lawn mower has the option to be manually pushed or motor-driven self-propelled when 
the motor is running.

NOTE: 

Ensure your battery is charged before use.

1. MANUAL OPERATING
NOTE:

 When starting, ensure the lawn mower is set to the highest height setting so the blades 

are not resting deep into the grass.
The lawn mower can be manually operated under the user’s own power when the mower is 
operating, i.e., the user is pushing the lawn mower forwards or backwards. 
1)  Install the battery pack to the mower. Refer to Installing and Removing the Battery Pack.
2)  Press down the lock off button, then pull ONLY the start bar upward towards the upper 

handle bar. Keep it in position to start the mower as welll as during use. (See Fig. I1)

3)  Release the lock off button and start operating the mower. 
4)  To stop the mower, release the start bar. Wait until the motor is fully switched off.

NOTE: 

•

  The start bar must be held firmly against the foam grip upper handle bar to both start the 

mower and to keep the mower running. Releasing the start bar will stop the mower.

•

  In case of an emergency, release the start bar immediately to switch off the mower.

2. SELF-PROPELLED OPERATING 

Self-propelled operation will only operate when the motor is running. 
1)  Install the battery pack to the mower. Refer to Installing and Removing the Battery Pack. 

2)  Pull the start bar towards the upper handle bar first, and then pull the self-propel 

engagement bar upwards towards the upper handle bar also. (See Fig. I2) 

3)  Hold the start bar and the self-propel engagement bar in position and the mower will move 

forward itself with the operator steering and directing using the handlebars.

4)  To stop the self-propelled operation, just release the self-propel engagement bar to its 

original position. The mower will stop moving forward unless the operator pushes the 

mower manually with sufficient force.

NOTE: 

The self-propelled operation is ONLY in the forward direction.

 

WARNING: Keep hands, feet, hair and clothing away from all 

the moving parts of the lawn mower. Make sure that the blade is 

securely fastened before starting the mower.

Summary of Contents for CLM48BCU1









































Reviews:

No comments

Brands by name

Popular brands

Load more brands