4 |
Model BL80204-1
OPERATION
CHARGE THIS BATTERY ONLY WITH
YARDWORKS
™
20V CHARGERS
TO CHARGE
•
Charge Yardworks 20V Lithium-ion Batteries
only with Yardworks 20V Chargers.
•
Make sure power supply is normal house voltage,
120 volts, 60 Hz, AC only.
•
Connect charger to power supply. The light will be
GREEN noting that the power is on.
•
Slide battery pack into charger.
•
Press down on battery pack to be sure contacts on
battery pack engage properly with charger contacts.
•
Charger light will be illuminated.
Constant RED light indicates battery is charging.
Constant GREEN light indicates battery is fully charged.
•
A minimum charge time of 160 minutes is required
to recharge a completely discharged battery pack.
The battery pack will become slightly warm to the
touch while charging.This is normal and does not
indicate a problem.
•
DO NOT
place charger in an area of extreme
heat or cold. It will work best at normal room
temperature.
•
When the battery is fully charged, unplug your
charger from power supply and remove the
battery pack.
CHARGING BATTERY PACK
Battery packs are shipped in a low charge condition to prevent
possible problems. Therefore, you should charge them prior to use.
NOTE:
Batteries will not reach full charge the first time they are charged.
Allow several cycles (operating tool followed by recharging batteries)
for them to fully charge.
CONSTANT GREEN WITH NO BATTERY
POWER IS ON
CONSTANT RED WITH BATTERY
BATTERY IS CHARGING
CONSTANT GREEN WITH BATTERY
BATTERY IS FULLY CHARGED
CHARGER
INDICATOR LIGHT
BL82120-1
2.0Ah Battery Pack
BL80204-1
4.0Ah Battery Pack
BATTERY CAPACITY
Pressing the largest button on the end of the
battery pack shows the LED battery capacity.
PRESS
BATTERY STATUS
LED LIGHTS
FULL CHARGE (70 -100%)
LED 1/2/3 LIGHTS
PARTIAL CHARGE (35 -70%)
LED 1/2 LIGHTS
LOW CHARGE (0 - 35%)
TIME TO CHARGE BATTERY
LED 1 LIGHT
Look for this symbol to point out important safety precautions.
IT MEANS ATTENTION! YOUR SAFETY IS INVOLVED!
