8
ASSEMBLY INSTRUCTIONS
Assembling the Handle (Fig. 1)
1. Remove any packing material that may have been inserted between the upper and lower handles for shipping
purposes.
2. Align the holes (4) on the upper handle (1) with the holes on the middle handle (2). Insert the bolts (5), and use
the wing nuts (6) to tighten them. (Fig. 1.1)
3. Align the holes (7) on the middle handle (2) and the lower handle (3). Insert the bolts (5), and tighten them using
the wing nuts (6) provided. (Fig. 1.2)
Assembling the Discharge Chute (Fig. 1)
Note: Do not overtighten the bolts.
Fig. 1.3
Fig. 1.2
Fig. 1.1
Fig. 1
8
9
10
11
12
12
13
15
16
17
18
14
1. Position the chute deflector (8) over the discharge chute (9), and align the mounting holes. (Fig. 1.3)
2.
3.
4. Insert a rubber washer (15) between the chute deflector (8) and the discharge chute, maintaining the alignment
of the holes (17).
serrated lock washers (18), and 2 locknuts (16).
5. Attach the chute deflector to the discharge chute using 2 carriage bolts (14), 4 washers (15), 4 external teeth
Insert a rubber washer (12) between the chute deflector (8) and the discharge chute, maintaining the alignment
of the holes (10).
Attach the chute deflector to the discharge chute using a carriage bolt (11), 2 washers (12), and a locknut (13).
5
4
6
5
7
6
1
2
3
Summary of Contents for 60-3983-8
Page 18: ...EXPLODED VIEW PARTS LIST 18 ...
