ASSEMBLY INSTRUCTIONS
Fig. 8
Fig. 7
Support Fitting
4.
Clip
1.
2.
Removing the Snap-on Bag
1.
2.
Snap-on Bag
Snap-on Bag Hook
Debris Exhaust Tube
Snap-on Bag Tube
Fig. 4
Fig. 3
Latching Tabs
ATTACHING AND REMOVING THE SNAP-ON BAG
Attaching the Snap-on Bag
1.
2.
Clip
Fig. 6
Latching Tabs
PRESS IN
PRESS IN
blow
vac
Vac
Blow
Fig. 5
INSTALLING THE SHOULDER HARNESS
9
Attach the vacuum bag to the snap-on bag hook on the
Blower/Vac tube (Fig. 3).
Slide the snap-on bag tube over the debris exhaust tube
on the housing. Push the tube until the latching tabs on
both sides click into place, securing the bag to the
Blower/Vac (Fig. 4).
Press the latching tabs on both sides of the bag tube,
and pull the bag down away from the Blower/Vac (Fig. 5).
Detach the vacuum bag from the vacuum bag hook.
Push the strap through the centre of the buckle.
Pull the strap over the crossbar and down through the
slot in the buckle (Fig. 6).
3. Snap the clip onto the support fitting (Fig. 7).
While standing in the operating position, adjust the
length of the strap to fit the size of the operator. Pull the
tab in order to lengthen the strap. Pull the strap in order
to shorten it (Fig. 8).
