model no. 274-1754-8 | contact us: 1.866.523.5218
model no. 274-1754-8 | contact us: 1.866.523.5218
6
Saf
ety Inf
ormation
!
WARNING: Read and understand all instructions.
Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious
personal injury.
Save all warnings and instructions for future reference.
The term “power tool” in all of the warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions can
cause you to lose control.
2. ELECTRICAL SAFETY
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply.
3. PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operating power tools may
result in serious personal injury.
• Use personal protective equipment. Always wear eye protection.
Protective equip-
ment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before con-
necting to battery pack, picking up or carrying the tool.
Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites acci-
dents.
• Remove any adjusting key or wrench before turning the power tool on.
A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
Proper footing and
balance enable better control of the tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,clothing
and gloves away from moving parts.
Loose clothes, jewellery, or long hair can be
caught in moving parts.
Summary of Contents for 274-1754-8
Page 12: ...model no 274 1754 8 contact us 1 866 523 5218 12 1 2 3 4 5 6 7 8 9 10 12 11 Exploded View...
Page 33: ......
Page 34: ......
