background image

2

 

 

 

SYMBOL 

DESCRIPTION 

SYMBOL 

DESCRIPTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Li-i on

 

 

 

Li-i on

 

 

Read the operator’s manual

 

 

 

 

SAFETY ALERT – indicate a 
precaution, a warning or a danger.

 

 

Wear respiratory protection

 

 

 

Wear safety footwear

 

 

 

DANGER 

Cutting hazard - Keep 

feet away from the rotating auger.

 

 

 

 

 

DANGER

 

Cutting/dismemberment hazard 
Keep hands away from the rotating 
auger. Stop motor before removing 
debris

 

 

 

Do not use hands to unclog chute.

 

 

 

 

 

 

Remove battery from the snow 

before carrying out any

 

adjustment, servicing or maintenance.

 

 

 

Batteries may enter water cycle if 
disposed of improperly, which can 
be hazardous to the ecosystem. 
Do not dispose of old batteries as 
unsorted municipal waste.

 

 

 

 

Li-ion battery. This product has been 
marked with a symbol relating to 
‘separate collection’ for all battery 
packs and battery pack. It will then be 
recycled or dismantled in order to 
reduce the impact on the environment. 
Battery packs can be hazardous for 
the environment and for human health 
since they contain hazardous 
substances.

 

WARNING

 

Do not expose the unit to rain or wet 

conditions. Keep dry.

 

 

 

Wear hearing protection.

 

 

 

 

Wear eye protection.

 

 

 

Wear protective gloves

 

 

 

 

CAUTION 

Beware of stone or other 

foreign objects that could be thrown 
from the appliance.

 

 

 

 

Indoor use only. Only use battery 
charger indoors.

 

 

 

 

 

The rotating part will continuously 
run for several seconds after you 
turn off the machine.

 

 

DANGER 

Cutting/dismemberment 

hazard Keep feet away from the 
rotating part.

 

 

Do not burn the battery pack.

 

Summary of Contents for 270-3397























Reviews: