model no. 060-3895-8 | contact us 1.866.523.5218
model no. 060-3895-8 | contact us 1.866.523.5218
24
25
Problem
Possible Reason
Solution
The log
splitter
does not
split logs.
The log is not positioned correctly.
Refer to the Operation section for
instructions on proper log loading.
The size or hardness of the log
exceeds the capacity of the machine.
Reduce the size of the log before
splitting it on the log splitter.
The wedge cutting edge is blunt.
Refer to “Sharpening the blade”
under the Maintenance section for
instructions on how to sharpen the
cutting edge.
There is an oil leak.
Locate the leak, and call the
helpline.
An unauthorized adjustment was
made to the maximum pressure
limiting screw—a lower maximum
pressure was set.
Call the helpline.
The log pusher
moves jerkily,
makes an
unfamiliar
noise, or
vibrates
excessively.
Not enough hydraulic oil and too
much air in the hydraulic system.
Check the oil level, and refill the
oil if necessary. If the problem
persists, call the helpline.
Oil leaks
around the
ram cylinder
or from other
points.
Air was sealed in the hydraulic
system during operation.
Loosen the bleed screw by
3 or 4 rotations before operating
the log splitter.
The bleed screw was not tightened
before moving the log splitter.
Tighten the bleed screw before
moving the log splitter.
The hydraulic control valve
assembly and/or seal are worn.
Call the helpline.
Tr
oubleshooting
Used electrical products are recyclable and should not be discarded
in your regular domestic waste. Please actively support us in
conserving resources and protecting the environment by returning
this appliance to a collection centre (if available).
Do not dump used oil into drains, soil, or water. Dispose of used oil
only at an authorized collection point or follow the regulations that
are in effect in your area.
En
vir
onmental P
rotection
W
arr
anty
WARRANTY
For TWO YEARS from the date of purchase within Canada, YARDWORKS CANADA will, at its
option, repair or replace for the original purchaser, free or charge, any part or parts found to be
defective in material or workmanship.
This warranty does not cover:
1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade sharpening;
5. Normal deterioration of the exterior finish due to use or exposure.
Full One Hundred Twenty Days Warranty on Normal Wear Parts: Normal wear parts are defined as
blade adaptors, blades, grass bags and tires. These parts are warranted to the original purchaser to
be free from defects in material and workmanship for a period of one hundred twenty (120) days from
the date of retail purchase.
How to Obtain Service: Warranty service is available by calling the toll-free helpline, at
1 866-523-5218. The factory will not accept the return of a complete unit unless prior written
permission has been extended by
YARDWORKS CANADA.
Transportation Charges: Transportation charges for the movement of any power equipment unit or
attachment are the responsibility of the purchaser. The purchaser must pay transportation charges
for any part submitted for replacement under this warranty unless such return is requested in writing
by
YARDWORKS CANADA.
Other Warranties: All other warranties, express or implied, including any implied warranty of
merchantability is limited in its duration to that set forth in this express limited warranty. The
provisions as set forth in this warranty provide the sole and exclusive remedy of
YARDWORKS
CANADA obligations arising from the sale of its products.
YARDWORKS CANADA will not be liable for incidental or consequential loss or damage.
