model no. 060-3864-2 | contact us: 1.866.523.5218
9
model no. 060-3864-2 | contact us: 1.866.523.5218
GUIDELINES FOR USING EXTENSION CORDS
USe tHe PRoPeR extenSion CoRD. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one of heavy enough gauge to carry the current
your product will draw. An undersized cord will cause overheating.
the table below shows the correct size to use depending on cord length and nameplate
ampere rating. if in doubt, use the next heavier gauge. the smaller the gauge number, the
heavier the cord.
Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified technician before
use. Keep extension cords away from sharp objects, excessive heat and damp or wet areas.
Use a separate electrical circuit for tools. this circuit should not be less than #12 wire and
should be protected with a 15 A time-delayed fuse. before connecting the motor to the power
line, make sure the switch is in the off position and the electric current is rated the same
as the current stamped on the motor nameplate. Running at a lower voltage will damage the
motor.
MINIMUM GAUGE FOR EXTENSION CORDS (AWG)
(when using 120 V only)
Ampere Rating
Total Length of Cord in Feet (meters)
More Than
Not More Than
25’ (7.6 m)
50’ (15 m)
100’ (30.4 m)
150’ (45.7 m)
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12
not Recommended
!
WARNING: Although this tool is double insulated, the
extension cord and outlet must still be grounded while
in use to protect the operator from electric shocks.
!
DANGER: This dethatcher is for outdoor use only. Do
not expose to rain or use in damp locations.
Electrical Information
