Yardworks 060-3801-2, Owner'S Manual

Page: 17 / 26

17
Operation
STARTING THE TILLER/CULTIVATOR (Fig. 9)
1. Plug the tiller into an approved outdoor extension cord.
2. Press the Safety-lock out button (1) and pull the Bale Trigger (2) upwards to the handlebar
to begin the rotation. Release Safety lock-out button while continuing to hold upward on
Bale Trigger to continue use.
STOPPING THE TILLER/CULTIVATOR (Fig. 9)
1. Release bale trigger to stop the tiller.
2. Circuit breaker, push to reset
Always wear safety goggles or safety glasses with side shields when
operating tools. Failure to do so could result in objects being thrown into the eyes, which
could cause a serious injury.
WARNING:
Do not use attachments or accessories that are not recommended by the
manufacturer of this tool. The use of attachments or accessories that are not recommended
can result in serious personal injury.
WARNING:
Keep hands, feet, and all other body parts or clothing away from the
rotating tines and all other moving parts. The tines begin to rotate forward when the switch
trigger is depressed, and they continue to rotate until the switch trigger is released. Any
contact could result in serious personal injury.
WARNING:
Do not allow familiarity with power tools to make you careless. Remember
that a fraction of a second of carelessness is enough to cause a serious injury.
WARNING:
1
2
Fig. 9
BALE
TRIGGER
SAFETY
LOCK-OUT
BUTTON
PLUG
CONNECTOR
CIRCUIT BREAKER