model no. 060-2293-6 | contact us: 1 866 523 5218
model no. 060-2293-6 | contact us: 1 866 523 5218
Operation
!
WARNING! To avoid injury:
To Turn On/Off
1. Press the safety lock out button (2) and squeeze
the trigger switch (1) to start.
2. Release the trigger switch (1) to stop.
Split and telescoping tube
The shaft can be extended or shortened for
ease of use.
1. Unscrew telescoping shaft coupler and
slide to desired position.
2. Tighten telescoping shaft coupler.
The cutting path can be adjust from 10’’ to 12’’.
Phillips screwdriver(not supply) will be used.
Loosen the screw and turn the
cutter 180° then tighten the
screw.
10’’
12’’
Adjust the cutting path
Lengthening the Line
While the grass trimmer is operating, the
cutting line gets worn down and
becomes shorter. This trimmer is
equipped with Automatic Line
Advancement, which automatically
feeds additional line to the
correct length as it wears down.
If the line does not automatically
advance, the trimmer line may be
tangled or empty.
To advance the line, restart the trimmer.
Upon starting, the line will automatically
advance.
Edging function
This trimmer is equipped with an edging feature for
use on the sidewalks or walkways, patios and/or
driveways to clear over-grown grass from manicured surfaces.
1. Pull up edging coupler and turn handle end
counterclockwise.
2. Release edging shaft coupler when handle
has been rotated 180°.
3. Flip the edging guide down until it locks into
place.
1
2
TO ROTATE
PULL UP BUTTON
EDGER GUIDE
REAR HANDLE
• Do not squeeze the trigger while the grass
trimmer/edger is inverted.
• Do not carry the grass trimmer/edger with your
finger on the switch. Avoid unintentional starting.
Operation
SPLIT AND
TELESCOPING
SHAFT
8
9
