model no. 060-2279-2 | contact us: 1.866.523.5218
20
GENERAL MAINTENANCE
Keep your grass trimmer clean and in good repair for maximum performance and service life.
before each use, inspect the switch and cord for damage. Check for damaged, missing, or
worn parts. Check for loose screws, misalignment, moving parts that are jammed, or any other
conditions that may affect the operation. If abnormal vibration or noise occurs, turn off the tool
immediately and have the problem corrected before further use. do not use the grass trimmer
until it is properly repaired or replaced.
CLEANING
Wipe the outside of the grass trimmer with a dry soft cloth. do not hose down or wash the grass
trimmer with water. Scrape the guard and spool area to remove dried clippings and mud. brush
or blow dust, debris, and grass clippings out of the air vents. Keep the vents free of obstruction.
CUTTING LINE
Replace the cutting line only with nylon monofilament line on pre-wound spools.
Always wind the line in the same direction as the arrow on the spool.
Use Yardworks® 60-2269-6 replacement spools.
LUbRICATION
no lubrication is needed.
!
WARNING: Turn off the tool and unplug the extension
cord from the outlet before performing any maintenance
on the grass trimmer.
!
CAUTION: Do not use strong solvents or detergents
on the plastic housing or plastic components.Certain
household cleaners may cause damage and may also
cause a shock hazard.
Maintenance
