manualshive.com logo in svg

Yardworks 060-1720-6, Instruction Manual

Share
Download
Yardworks 060-1720-6 Instruction Manual Download Page 23

model no. 060-1720-6  |  contact us: 1.866.523.5218

23

Symbols

 

SAVE THESE INSTRUCTIONS!

Some of the following symbols may be used on this product. Please study them and learn their 
meaning. Proper interpretation of these symbols will allow you to operate the product better and 
safer.

Symbol Name

Designation/Explanation

V

Volts

Voltage.

A

Amperes

Current.

Hz

Hertz

Frequency (cycles per second).

W

Watts

Power.

min

Minutes

Time.

Alternating Current

Type of current.

Direct Current

Type or a characteristic of current.

No Load Speed

Rational speed, at no load.

Class II Construction

Double-insulated construction.

/min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute.

Wet Conditions Alert

Do not expose to rain or use in damp locations.

Read The Operator’s 

Manual

To reduce the risk of injury, user must read and understand operator’s 

manual before using this product.

Eye Protection

Wear eye protection when operating this equipment.

Ricochet

Thrown objects can ricochet and result in personal

injury or property damage.

Sharp Blade

Danger – keep hands and feet away from blade.

Operating on a slope

Do not mow a slope that has an angle greater than 15°.

Keep Bystanders Away

Keep all bystanders at least 100’ away.

no

           

  

 

Summary of Contents for 060-1720-6

































Reviews:

No comments

Brands by name

Popular brands

Load more brands