manualshive.com logo in svg

Yardworks 060-1720-6, Instruction Manual

Share
Download
Yardworks 060-1720-6 Instruction Manual Download Page 22

model no. 060-1720-6  |  contact us: 1.866.523.5218

22

Tr

oubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

 
 
 
 
 
Motor refuses to 
start. 
 
 
 
 
 
 
 
Mower functions 
intermittently. 
 
 
 
 
 
Mower leaves 
ragged finish and/or 
motor labours. 
 
 
 
 
Blade not rotating 
while mower is 
switched on. 
 
 
 
Excessive 
vibrations/noise.

Power turned off.

Mains socket faulty. 
 
Extension cable damaged. 
 
Fuse faulty/blown.

Grass too long.

 

Motor protector has been activated.

Extension cable damaged.

Internal wiring of mower damaged.

Motor protector has been activated. 
 
Cutting height too low. 
 
Cutting blade blunt. 
 
Possible clogging. 
 
 
Blade fitted upside down. 
 
Cutting blade obstructed. 
 
 
Blade nut/bolt loose. 
 
 
Blade nut/bolt loose. 
 
Cutting blade damaged.

Turn power on.

Use another socket.

Inspect cable, replace if damaged. 
 
Replace fuse.

Increase cutting height and tilt mower to reduce 
starting load.

Allow motor to cool and increase cutting height.

Inspect cable, replace if damaged.

Contact service agent. 
 
Allow motor to cool and increase cutting height. 
 
Increase cutting height. 
 
Replace the blade. 
 
Check underneath the mower and clear out as 
necessary (always wear gardening gloves). 
 
Refit blade correctly. 
 
Switch off mower. Clear obstruction (always wear 
gardening gloves). 
 
Tighten blade nut/bolt. 
 
 
Tighten blade nut/bolt. 
 
Replace the blade.

Summary of Contents for 060-1720-6

































Reviews:

No comments

Brands by name

Popular brands

Load more brands