background image

ELECTRICAL REQUIREMENTS

Confirm  that  you  have  a  US  Standard,  3  pin  grounded,  Type  B, 

15AMP (nEMA 5-15) outlet.

Check that the electric circuit is grounded, adequately protected, 
and that it corresponds with the power, voltage, and frequency of 

the motor.

ELECTRICAL CONNECTION

This mixer is double insulated to Class II protection and IP44D 
rated. The insulation will only remain effective if the original 
insulating parts are used for repairs and the spaces between the 
original insulation are maintained.

STAKE ON LEVEL GROUND

To secure your YARDMAX concrete mixer during operation, 
use two longer bolts or stakes through the holes in the front leg 
of the mixer stand to hold the mixer in place. (See 

Figure 7

) Due 

to varying ground surfaces, these are not included. Choose the 
right type of bolt or stake for your surface type or call us for a 
recommendation.

OPERATION

This mixer is double insulated to Class II protection 
and IP44D rated. To keep this rating, it is critical 
that the disassembly andreassembly of the electric 
control enclosure is performed properly. Only a 

qualified electrician is allowed to repair the enclosure 

of electric control.

Do not connect either cord to the earth pin.

Figure 7

DRUM TILTING

The spring-loaded tipping bar with locking lugs allows for tipping 
control of the drum (See 

Figure 8a

), and can be locked in the 

following positions (see 

Figure 8b

): loading/Mixing – mortar, 

loading/Mixing – concrete, Discharging, and Storage.

The drum is locked into the desired position by the lugs on the 
self-locating tipping bar, which lock into the slots on the locking 
plate on the mixer frame. (See 

Figure 8a

) To tilt the drum, pull the 

tipping bar slightly toward you (away from the frame) to disengage 
the locking lugs. This allows the tipping bar to turn the drum in the 
desired direction.

To lock the drum in position, slightly release the tipping bar 
(towards the mixer frame) when rotating the drum. The lugs will 
slide and then lock into the nearest position on the locking plate.

Figure 8a

Double insulation ( 

 ) eliminates the need for the 

three-pronged, grounded power cord and a grounded 
power supply system. Double-insulated devices can 
use either a two- or a three-pronged extension cord.

Land

Leg

M8×35

 (×2)

12

Electric Concrete Mixer   

»   

Operator’s Manual

 

     

Operation   

|

74005US25M100.indd   12

2017/3/14   11:12:24

Summary of Contents for YM0046





















Reviews: