Yardmaster 1010 TYZ, Instruction Manual

Page: 3 / 28

BEFORE STARTING, READ THROUGH THE ASSEMBLY INSTRUCTIONS CAREFULLY.
CHECK THOROUGHLY ALL THE PARTS YOU HAVE RECEIVED AGAINST THE PARTS DIAGRAMS
PAGES 1-3.
ENSURE THAT NO PARTS ARE DAMAGED.
ALWAYS ASSEMBLE THE ROOF FIRST, ESPECIALLY IF YOU DO NOT INTEND TO COMPLETE
CONSTRUCTION ON THE SAME DAY.
DO NOT ERECT YOUR BUILDING ON A WINDY DAY. ANY
BUILDING LEFT PARTIALLY CONSTRUCTED MAY BE
DAMAGED.
ALL ASSEMBLY OPERATIONS MUST TAKE PLACE ON A
LEVEL SURFACE.
WASHERS TO BE USED ON ALL SCREWS
THE SHED SHOULD BE SECURELY ANCHORED TO A
FIRM LEVEL BASE EG CONCRETE, PAVING SLABS OR
WOOD. CONCRETE SHOULD BE LAID A MINIMUM OF
75MM THICK AT APPROX. 25MM ABOVE GROUND LEVEL.
A SHEET OF HEAVY DUTY POLYTHENE PLACED UNDER
THE BASE AREA WILL HELP PREVENT DAMPNESS
RISING FROM THE GROUND INTO THE SHED.
GB-IE
2
YOU WILL NEED
GB-IE
IT IS RECOMMENDED THAT YOU WEAR GLOVES WHEN ASSEMBLING THIS PRODUCT
TWO PERSON OPERATION
KEEP CHILDREN AWAY DURING ASSEMBLY
SAFETY
Before you start / Safety