36
A:
At one end of each Roller Channel Assembly attach one 3/16” x 1-1/4” Eye Bolt (with 3/16” standard nut, 2
3/16” flat washers and 3/16” lock nut) as shown in fig. 17.1 and 17.2. Make sure the eyebolt does not protrude
through the lock nut and the eyebolt faces the direction shown in fig. 17.2. This will be the Back or Fixed Side of
the assembly.
Step 17: Attach Eye Bolts
Fig. 17.1
Fig. 17.2
3/16” x 1-1/4”
Eye Bolt
Watch for protrusions
3/16” Standard Nut
Note orientation of eyebolt
Hardware
2 x 3/16 x 1-1/4” Eye Bolt
(3/16” standard nut, 3/16” flat washer x 2, 3/16” lock nut)
3/16” Flat Washer
3/16” Lock Nut
Roller
Channel
Assembly
Back or
Fixed Side
Front Side
