3
Limited Warranty
Yardistry warrants that this product is free from defect in materials and workmanship
for a period of one year from the original date of purchase. In addition, all lumber is
warranted for 5 years against rot and decay. This warranty applies to the original owner
and registrant and is non-transferable.
Regular maintenance is required to assure the integrity of your product and is a requirement of
the warranty. This warranty does not cover any inspection cost.
This Limited Warranty does not cover:
•
Labor for replacement of any defective item(s);
•
Incidental or consequential damages;
•
Cosmetic defects which do not affect performance or integrity;
•
Vandalism; improper use or installation; acts of nature;
•
Acts of nature including but not limited to wind, storms, hail, floods, excessive water
exposure;
•
Minor twisting, warping, checking, or any other natural occurring properties of wood that
do not affect performance or integrity.
Yardistry products have been designed for safety and quality. Any modifications made to the
original product could damage the structural integrity of the product leading to failure and
possible injury. Yardistry cannot assume any responsibility for modified products. Furthermore,
modification voids any and all warranties.
This product is warranted for RESIDENTIAL USE ONLY. Yardistry disclaims all other
representations and warranties of any kind, express or implied.
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to
province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of
consequential damages, and therefore this limitation may not apply to you.
Instructions for Proper Maintenance
Your Yardistry structure is designed and constructed of quality materials. As with all outdoor products it will
weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you, the owner,
properly maintain it.
If you dispose of your Yardistry structure:
Please disassemble and dispose of your unit so that it does not cre-
ate any unreasonable hazards at the time it is discarded. Be sure to follow your local waste ordinances.
HARDWARE:
• Check metal parts for rust. If found, sand and repaint using a non-lead paint complying with 16 CFR 1303.
• Inspect and tighten all hardware after completion of assembly; after first month of use; and then annually.
Do not over-tighten as to cause crushing and splintering of wood.
• Check for sharp edges or protruding screw threads, add washers if required.
WOOD PARTS:
• Unprotected they will appear weathered over time. Periodic application of an exterior water repelllent or
stain (water-based) will help improve appearance and life.
• Check all wood members for deterioration, structural damage and splintering. Sand down splinters and
replace deteriorated wood members. As with all wood, some checking and small cracks in grain is normal
