Yardistry MADISON YM11783X, Installation And Operating Instructions Manual

Page: 31 / 46

31
support@yardistrystructures.com
REPEAT FOR OTHER SIDE
HARDWARE x2
6 ‐ S11 ‐ #8 X 2" W.S
1 ‐ y50000 ‐ 498 ‐ Shelf Gusset
1 ‐ y50000 ‐ 516 ‐ Bar Gusset
Bar Gusset is 40" from ground,
overhangs 7 ‐ 7/8" to front side.
Shelf Gusset is 22 ‐ 1/2" from ground,
overhangs equally PG 16
REPEAT FOR OTHER SIDE
HARDWARE x2
6 ‐ S11 ‐ #8 X 2" W.S
1 ‐ y50000 ‐ 498 ‐ Shelf Gusset
1 ‐ y50000 ‐ 516 ‐ Bar Gusset
Bar Gusset is 40" from ground,
overhangs 7 ‐ 7/8" to front side.
Shelf Gusset is 22 ‐ 1/2" from ground,
overhangs equally
PG 16
Fig. 12.2
Hardware Wood Parts
2 x (516) Bar Gusset
2 x (498) Shelf Gusset 12 x #8 x 2” Wood Screw
(516) Bar Gusset
Fig. 12.1
#8 x 2”
Wood
Screw
Inside View
(498) Shelf
Gusset
A: On one short side place one (516) Bar
Gusset against (528) Panel Post so the top
meaures 40-1/8” from the bottom of (528)
Panel Post. The longer end over hangs the
outside of (528) Panel Post by 7-7/8”. Make
sure gusset is level then attach (516) Bar
Gusset to (528) Panel Post with three #8 x 2”
Wood Screws. (fig. 12.1 and 12.2)
B:
Below the (516) Bar Gusset place one
(498) Shelf Gusset so the top meaures 22-1/2”
from the bottom of (528) Panel Post and each
end over hangs equally. Make sure gusset is
level then attach (498) Shelf Gusset to (528)
Panel Post with three #8 x 2” Wood Screws.
(fig. 12.1 and 12.2)
C: Repeat Steps A and B on the other (528)
Panel Post on the same side. (fig. 12.1 and
12.2)
Short Side
(528)
Panel
Post
(528)
Panel
Post
#8 x 2” Wood
Screw
40-1/8”
22-1/2”
7-7/8”
Step 12: Bar Assembly - Gussets