Step 8.
Fasten the swing beam to the 2x6 railing using 3” hex head lags
through the tabs on the bracket.
Step 9.
Use a 7/16” drill bit to drill two holes through the 2x6 railing then
fasten the bracket to the railing using two 2 3/4” threaded rods.
Step 6.
Place the corner bracket on the inside of the post and fasten it
with 1 3/4” washer head screws.
Step 7.
Lift the swing beam up into place on the tower.
Note:
The 4x4 end post may need to be shortened depending on
the ground. If the playset is on a perfectly level surface the post
should be cut to 91”.
Otherwise check the swing beam to see if it is level then trim the
post accordingly.
Summary of Contents for Pluto
Page 1: ...Pluto Assembly Manual...