4
Phobos
Vinyl Playset
Assembly Manual
Unpack and identify parts.
Begin assembly by placing four 2x6x56" in a square.
Place four corner braces at each corner. Holes on 2x6's
and corner brackets are offset. A good pattern to use is
left-low, right-high.
This pattern should be used in the entire framing process.
Place tower 4x4 in corner. Alight pre-drilled holes on
4x4 with pre-drilled holes on 2x6.
Using 6 7/8" bolts, begin fastening 2x6's to tower 4x4.
Thread acorn nut onto rod as far as you can, then back
off several turns.
Be sure to place washer between acorn nut and vinyl.
Step 1:
Step 4:
Step 3:
Step 2:
