background image

3

SECTION 1:  IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could
endanger the personal safety and/or property of yourself and others. read and follow all
instructions in this manual before attempting to operate your lawn mower. failure to comply with
these instructions may result in personal injury. When you see this symbol, heed its warning.

WARNING: The Engine Exhaust from this product contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.

DANGER: 

Your lawn mower was built to be operated according to the rules for safe operation in this

manual. As with any type of power equipment, carelessness or error on the part of the operator can

result in serious injury. This lawn mower is capable of amputating hands and feet and throwing objects.
Failure to observe the following safety instructions could result in serious injury or death.

   GENERAL OPERATION

Read, understand, and follow all instructions in the 
operator’s manual and on the machine before 
starting. Keep this manual in a safe place for future 
and regular reference and for ordering replacement 
parts.

Only allow responsible individuals familiar with the 
instructions to operate the machine. Know controls 
and how to stop the machine quickly.

Do not put hands or feet under cutting deck or near 
rotating parts.

Clear the area of objects such as rocks, toys, wire, 
etc., which could be picked up and thrown by the 
blade. A small object may have been overlooked 
and could be accidentally thrown by the mower in 
any direction and cause injury to you or a 
bystander. To help avoid a thrown objects injury, 
keep children, bystanders and helpers at least 75 
feet from the mower while it is in operation. Always 
wear safety glasses or safety goggles during 
operation or while performing an adjustment or 
repair, to protect eyes from foreign objects. Stop 
the blade(s) when crossing gravel drives, walks or 
roads.

Be sure the area is clear of other people before 
mowing. Stop machine if anyone enters the area.

Never carry passengers.

Disengage blade(s) before shifting into reverse and 
backing up. Always look down and behind before 
and while backing.

Be aware of the mower and attachment discharge 
direction and do not point it at anyone. Do not 
operate the mower without either the entire grass 
catcher or the chute guard in place.

Slow down before turning. Operate the machine 
smoothly. Avoid erratic operation and excessive 
speed.

Never leave a running machine unattended. 
Always turn off blade(s), place transmission in 
neutral, set park brake, stop engine and remove 
key before dismounting.

Turn off blade(s) when not mowing.

Stop engine and wait until blade(s) comes to a 
complete stop before (a) removing grass catcher or 
unclogging chute, or (b) making any repairs, 
adjusting or removing any grass or debris.

Mow only in daylight or good artificial light.

Do not operate the machine while under the 
influence of alcohol or drugs.

Watch for traffic when operating near or crossing 
roadways.

Use extra care when loading or unloading the 
machine into a trailer or truck. This unit should not 
be driven up or down a ramp onto a trailer or truck 
under power, because the unit could tip over, 
causing serious personal injury. The unit must be 
pushed manually on a ramp to load or unload 
properly.

Never make a cutting height adjustment while 
engine is running if operator must dismount to do 
so.

Wear sturdy, rough-soled work shoes and close-
fitting slacks and shirts. Do not wear loose fitting 
clothes or jewelry. They can be caught in moving 
parts. Never operate a unit in bare feet, sandals, or 
sneakers.

Check overhead clearance carefully before driving 
under power lines, wires, bridges or low hanging 
tree branches, before entering or leaving buildings, 
or in any other situation where the operator may be 
struck or pulled from the unit, which could result in 
serious injury.

Disengage all attachment clutches, thoroughly 
depress the brake pedal, and shift into neutral 
before attempting to start engine.

Your mower is designed to cut normal residential 
grass of a height no more than 10". Do not attempt 
to mow through unusually tall, dry grass (e.g., 
pasture) or piles of dry leaves. Debris may build up 
on the mower deck or contact the engine exhaust 
presenting a potential fire hazard.

Summary of Contents for 820 Thru 829





























Reviews: