![background image](http://html1.mh-extra.com/html/yard-force/yf7302/yf7302_operators-manual_905828014.webp)
14
cutting depth (See figure 7), and check that the frame of the edger is level.
2. Remove the oil fill cap/dipstick and wipe clean with cloth. (See Figure 3)
3. Insert dipstick into fill spout but do NOT screw in. Remove dipstick and check
oil level.
4. When oil level is full, the oil will be at upper limit on dip stick. If oil level is near
or below the lower limit, oil must be added. (See figure 4)
5. Add oil slowly until the oil level reaches the upper limit of the dipstick. use a
funnel or nozzle to reduce spillage.
6. Replace and tighten dipstick.
7. Clean up any spilled oil.
Fuel
WARNiNG!
• Gasoline is extremely flammable and vapors can explode if ignited.
handle with care. use fresh, clean, regular-unleaded gasoline with a
minimum of 88 Octane. Do NOT use leaded gasoline, gasohol, methanol,
or diesel fuel. Do NOT mix oil with gasoline. Do NOT allow gasoline to
become contaminated with dust, water, or debris.
CAUTiON!
using incorrect fuel type or contaminated fuel will cause serious engine
damage.
NOTE: fuel tank capacity is approximately 1.7 qt (1.6l)
HOW TO FiLL ENGiNE WiTH FUEL
WARNiNG!
• Turn engine off and let engine cool for several minutes before
removing the fuel cap or adding fuel.
• Never fill fuel tank indoors.
• Do not smoke while adding fuel.
1. Clean surface around fuel tank cap to prevent contamination. (See figure 3)
2. loosen fuel cap slowly. After removing cap, place on a clean surface.
3. Pour fuel into the tank. use care to avoid spillage.
WARNiNG!
Do NOT OVERfIll fuel. Allow space for the fuel to expand due to heat
from engine and/or sun.
4. before replacing the fuel cap, inspect and clean the fuel cap seal.
5. Replace the fuel cap and securely hand-tighten.
6. Clean up any spilled fuel.