14
ADJUSTMENT
WARNING:
Never operate the cutting
height adjustment handle roughly. Switch off the
tool and make sure that the blade has stopped
completely.
Adjust the cutting height
The cutting height is centrally adjusted by the
height adjustment knob.
Different cutting heights can be selected as
follow:
1. Pull the adjusting handle outwards. (See Fig.
14)
2. Move it forwards or backwards to select the
desired cutting height.
3. Return adjusting handle back into plate.
Make sure the lever be secured in position.
From position 1 to position 7, the cutting
height ranges from 1.25 " to 3.75 ".
OPERATION
To insert the battery pack (See Fig. 15)
1. Open the battery pack guard and hold it in
place.
2. Align the groove on the battery pack with the
corresponding ribs in the receptacle of the
device.
3. Depress the battery pack with moderate force
until it was locked in place .
4. Close the guard.
WARNING:
Make sure that the tool is
“POWER OFF”.
To remove the battery pack from the tool
1. Open the battery pack guard and hold it in
place.
2. Depress the releasing/locking button. The
battery pack will pop up automatically.
3. Lift and hold the battery pack while pressing
the releasing/locking button again, and then
remove the battery pack. (See Fig. 16
)
Note!
The second operation that needs to be
performed when removing the battery pack is
to avoid any misoperations at work, especially
for the 60VRX hand-held tools, in case the
battery pack falls and hurts consumers.
Safty Key
The machine is fitted with a safety key, this
prevents the accidental start up of cordless lawn
mower.
The safety key has been design to totally disable
the lawn mower when the key is removed. (See
Fig. 17)
To Switch ON:
- Depress the safety lock button and keep it in
place. Whilst pulling the operator presence
control bar towards the handle and hold it in
position. The motor will start to work, blade
will rotate. Then release the safety lock
button. (See Fig. 18
)
CAUTION!
1. Do not start the motor in high grass!
For high grass, before you start the lawn
mower, lift the head of the mower a little, after
the mower be start then put down to cut the
high grass.
2. Before starting the lawn mower, ensure
that the battery pack and safety key are
correctly installed in place.
3. Before operating the device, remove stones,
loose pieces of wood and other objects from
the cutting area.
To Switch OFF:
1. Release the operator presence control bar.
WARNING:
The blade will rotate on for several seconds after
the tool has been switched off.
Use self-propel function with the blade cutting
(See Fig. 19)
1. Start the mower follow the steps above.
2. While holding the operator presence control
bar with one hand, then also engage the self-
propel switch lever and the machine will then
start to move automatically.
3. To stop the moving lawn mower, just release
the self-propel bail.
Operate the lawn mower
Operation on a slope.
NOTE:
Slopes are a major factor related to slip
and-fall accidents, which can result in severe
injury.
