13
RESIDUAL RISKS
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
- Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
- Injuries and damage to property due to
broken application tools or the sudden impact
of hidden objects during use.
- Danger of injury and property damage
caused by flying objects.
Warning!
This product produces an
electromagnetic field during operation! This field
may under some circumstances interfere with
active or passive medical ivmplants. To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
ASSEMBLY
Install the handle
1. Insert the lower handle to the two side
brackets on the mower deck. Use
corresponding holes on the brackets when
attaching lower handle pin for a suitable
handle height desired. Fasten the lower
handle to the lawn mower by using lower
handle fixing knobs, tighten by hand to
secure it.(See Fig. 5 & 6).
2. Attach the upper handle into place and attach
it to lower handle by using handle quick-
release knobs. Make sure that the handle is
securely locked in position. (See Fig. 7)
Fitting cable clips
Locate the cable into the cable clip and then clip
securely onto the handle. (See Fig. 8)
Assemble grass bag and fit it onto the mower
1. Slip the vinyl clip bindings over the frame.
(See Fig. 9)
2. Lift the rear flap with one hand and locate the
grass bag onto the hooks. Release the rear
flap, make sure to secure the grass bag in
position. (See Fig. 10)
Installing the mulching plug
NOTE:
Switch off the tool and make sure that the
blade has stopped completely.
1. Lift the rear flap with one hand and push the
mulching plug into the rear discharge chute
until it is locked in place. Make sure that the
mulching plug is locked in position.
(
See Fig.
11
)
.
2. Release the rear flap, it will close back to
cover the mulching plug.
3. If you want disassemble the mulching plug,
hold the handle of the mulching plug, press
down the hook with finger, meanwhile lift it
upward slightly and pull it out.
Installing the side discharge deflector
NOTE:
Switch off the tool and make sure that the
blade has stopped completely.
1. Keep the mulching plug in the rear discharge
chute.
2. Lift the side discharge guard with one hand
and hook in the side discharge deflector with
the other hand. (See Fig. 12)
3. Release the side discharge guard to secure
the deflector in position. (See Fig. 13)
To convert the mower
WARNING!
Before changing any
accessory, switch off the tool and make sure that
the blade has stopped completely!
NOTE:
This lawn mower has three functions.
These functions can be converted by changing
accessory setting as described above. Please
see the following chart for detail.
Mulching
plug
Grass
bag
Side
discharge
chute
Rear bagging * ×
√
×
Mulching *
√
×
×
Side discharge*
√
×
√
“√”: installed “×”: uninstalled
* The following information:
1. Rear bagging: the grass has been cut and
collected by grass bag.
2. Mulching: mulch the grass, by cutting into
small pieces which then degrade and fertilise
the lawn.
3. Side discharge: the grass has been cut and
distributed to the side of the machine.
