9
Hotline: 1-866-902-9690
ESPECIFICACIONES TÉCNICAS
Tipo de motor
De un cilindro y de 4 tiempos
Cilindrada
163 cc
Velocidad del motor
3100±100 rpm
Trayectoria de corte
22" (56 cm)
Altura de corte
1.5"-3" (38-76 mm)
Hilo de corte
0.155" (4 mm)
Diámetro de las ruedas
14"
ESPECIFICACIONES TÉCNICAS
MONTAJE
Lea las instrucciones de montaje y ajuste, y sígalas. No elimine ninguna pieza ni material hasta que esté
montado el aparato.
NOTA:
El par se mide en pies-libra (la unidad métrica es Nm). La medición describe lo apretada
que debe estar una tuerca o un tornillo. El par se mide con una llave dinamométrica.
ADVERTENCIA
Para montar el cortabordes, utilice siempre gafas de seguridad o protección ocular
que cumplan las normas ANSI.
ADVERTENCIA
Antes de realizar trabajos de montaje o mantenimiento en el aparato, quite el cable de la bujía.
AJUSTE DEL MANGO
1. Ajuste los tornillos hasta que se desengranen los dientes de la rueda dentada. No quite los tornillos de
ajuste del mango (ver fig. 3).
2. Separe los laterales del mango y gire el mango hasta la posición que desee detrás del cortabordes.
3. Colóquese en la posición del usuario detrás del cortabordes, para asegurarse de que el mango esté
ajustado a una posición cómoda.
4. Apriete los tornillos de ajuste del mango.
5. Para colocar el tirador del cordón de arranque en la guía de la cuerda, enganche la cuerda a través de
la guía de la cuerda montada en el lado derecho del mango.