![background image](http://html1.mh-extra.com/html/yard-force/yf21-sd-tw/yf21-sd-tw_operators-manual_905816012.webp)
12
Hotline: 1-866-902-9690
ASSEMBLY
FILLING WITH ENGINE FUEL
As shown in Fig. 9
CAUTION!
Always use clean, fresh unleaded gas. Purchase fuel in quantities that can be used
、
within 30 days. Never mix oil with gas.
CAUTION!
Do not fill into the base of neck to allow for fuel expansion. Do not overfill the fuel tank.
CAUTION!
WARNING! Gas is highly flammable and extreme caution must be taken when handling
or working with it. Keep out of reach of children.
CAUTION!
To prevent engine damage the engine is shipped without oil or gas. The engine must be
filled with the correct grade of oil and gas before starting the engine.
WARNING!
Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flame
or sparks in the area where the engine is refueled or where gas is stored. Avoid repeated or
prolonged contact with skin or inhalation of vapour.
WARNING!
Gasoline with up to 10% ethanol (gasohol) is acceptable.
Do not use unapproved gasoline, such as E15 and E85.
1. Clean the area around the gas filler cap before removing the cap. Remove the warning tag, and check
the fuel level (see Fig. 9).
2. Refill the tank if the fuel level is low.
3. Refuel carefully to avoid overfilling or spilling fuel. To allow expansion of the fuel, don't fill above the
bottom of the filler neck (see Fig.10). There should be no fuel in the filler neck.
4. Clean up any overflow or splashes of gas before starting the engine.
5. Tighten the filler cap after filling: finger tight only.
Fig.9
Fig.10
gas filler cap
2”