![background image](http://html1.mh-extra.com/html/yard-force/y0lmx21p300/y0lmx21p300_operators-manual_905807007.webp)
12
13
UNFOLD THE HANDLE
1. Rotate the handle quick release levers to release the operation handle (Both sides). (See Fig. 3)
120v
LITHIUM-IO
N
TM
Fig. 3
2. Rotate the handle and then position the lower handle lock pin into the mower bracket - one of the three
angle positions (Both sides). (See Fig. 4)
3. Lock the handle in place by closing the handle quick release levers- make sure that the handle is
securely locked in position (Both sides). (See Fig. 4)
Fig. 4
4. Assemble the upper handle (Fig. 5)
Lift the upper handle, and lock in place using the handle tension knob and tensioning bolts. Ensure the
lower and upper handles are firmly connected. A wrench is needed to tighten the nut.
Fig. 5
ASSEMBLY
Check the cable clips fitting
Make sure the cable clips fits on upper handle securely and the cable into the cable clips. (See Fig. 6)
Fig. 6
Fit grass bag onto the mower
1. Lift the rear flap and remove the pre-assembled mulching plug from the machine. (See Fig. 7)
Fig. 7
2. Insert the grass bag onto the hooks. Release the rear flap to secure the grass bag in position. (See Fig.
8)
Fig. 8
Installing the mulching plug
NOTE:
Switch off the tool and make sure that the blade has stopped completely. Then remove the
battery completely.
ASSEMBLY