![background image](http://html1.mh-extra.com/html/yard-force/sc600eco/sc600eco_original-instruction_905805020.webp)
36
37
PROGRAMMING
PROGRAMMING
5.5. Cutting
Press button and close top cover, then the robot mower will start to work.
When LED above the symbol shining, means the battery remain capacity is very low,
at this time, robot mower will go back to charging stating to get charged.
5.6 Charging
After successfully dock into the charging station, the LED above the symbol will flash.
Note: In normal working status, if you press “STOP” button on top
of the robot mower and then press the button of “
” on the keyboard, robot will go
back to charging station as well, no matter how much battery capacity remains.
5.7 Lock and Unlock
5.7.1 Lock
When you want to robot stop working for a certain time and keep the battery active, you
may lock the robot mower and put it back to charging station. When you press the
button, the robot will be locked and all the other button (except the
button) will be
locked as well.
The LED on
shining shows the robot is locked.
Note: Locked machine can be charged in the charging station!
5.7.2 Unlock
The factory default locking lift: press
button 4 times within 6 seconds. LED light go
out, unlocked.
5.8 Change PIN code.
5.8.1 The analog keyboard
4H—0 6H—1 8H—2 10H—3 S1—4 S2—5
5.8.2 Activate the user Settings
Close the main power switch — press the
and maintain—open the main power switch
—
light flashing and the buzzer ring — analog keyboard lights flashing — loosen the
, then the user enter a new 4 digit PIN CODE in 6 seconds.
Note: Enter the PIN CODE from analog keyboard, by pressing the button to stop
flashing and buzzer ring 1 second, enter the 4 digit PIN CODE, buzzer nights for 2
seconds and mowing robot back to standby mode. If in 6 seconds does not enter 4
digit PIN CODE, returned to the standby mode, PIN CODE doesn’t change.
Note: If you do not remember your PIN code please call your service provider.