![background image](http://html1.mh-extra.com/html/yard-force/robomower-sa800pro/robomower-sa800pro_original-instructions-manual_905799032.webp)
62
63
Display
message
Description
Action
ERROR
Wrong passcode has been
entered.
Enter the correct PIN passcode.
HOME
The mower is returning to
the charging station.
–
LOW
BATTERY
Battery power is low.
If the mower fails to automatically return to the
charging station, carry it to the charging station for
charging.
LIFTED
The mower has
been lifted upward.
Check if the grass is too tall (> 60 mm) and cut
the grass with a normal mower before you start
using the mower again.
Check if the mower is free from obstructions.
NO SIGNAL
The mower cannot receive
signals from the boundary
cable.
Check if the LED indicator light is blue (no
interruptions). Refer to the table “Charging
station” at the beginning of this section for error
messages.
Check if the charging station is properly
connected to a power outlet.
Check if the signal of the boundary cable (S1 or
S2) of the mower is the same as the charging
station.
If you are using the mower for the first time,
bring it close to the boundary cable.
OBSTACLE
A problem occurs
at the obstacle sensors.
Check that the mower is not stuck in the middle
of an obstacle.
Contact after sales service if the problem cannot
be resolved.
OUTSIDE
The mower is outside of
the boundary cable.
Check if the boundary cable is installed properly if
the mower is still inside the mowing area.
Bring the mower back inside the mowing area
and restart the mower.
If the mower runs outside of the boundary cable
at a corner, adjust and enlarge the angle to
exceed 90°.
If the mower constantly runs outside of the
boundary cable at one place, check if there is
a high power cable close to or underneath the
boundary cable. If this is the case, avoid the area
by changing the position of the boundary cable.
Display
message
Description
Action
TRAPPED
The mower is trapped.
Remove the mower from the obstacle. This
warning occurs when the collision sensor has
been triggered more than 10 times within a
minute.
RUNNING
The mower is working.
–
SPARE TIME No work is assigned
to the mower.
If the mower should be working, restart the
mower.
Program the working periods if necessary.
CRITICAL
SLOPE
The mower has
been tilted.
Check if the slope is too slippery to climb
and make corrections to the mowing area if
necessary.
TURNOVER The mower is
overturned.
Turn over the mower, bring it to a flat area and
restart it.
WAITING
The mower is just about to
enter the sleep mode
because the battery
power is low.
Press any buttons on the control panel.
TROUBLESHOOTING
TROUBLESHOOTING