![background image](http://html1.mh-extra.com/html/yard-force/n0f-gt-250-18-d/n0f-gt-250-18-d_operating-manual_905871029.webp)
27
OPERATION
TIPS
1. For best results, do not cut wet grass because it tends to stick to the cutting head
and guard, prevents proper discharge of grass trimmings, and could cause you to slip
and fall.
2. Pay special attention when performing the work close to trees and bushes. The
cutting head could damage sensitive bark, and damage fence posts.
3. Use the flower protector to avoid cutting device contact with hard objects such as
walls and kerbstones.
4. If you want to have a rest for a short while during work time, find a flat ground, and
adjust the operating handle to upright angle, this device can stand on ground by
itself.
Fig 19
Replacing The Nylon Line Spool
WARNING:
Before performing any assembly. Always ensure that the battery pack
has been removed. If the nylon cutting line is broken and the nylon spool needs
replacing:
1. Press together the both locking devices at the spool cover and remove the spool
cover. Remove the old spool.
2. Thread the new/refilled spool line through the eyehole in the trimmer head.
3. Fit the line spool in the trimmer head.
4. Refit the line spool cover.
WARNING:
Never use steel, wire, rope, string, etc. which can break off and
become a dangerous missile.
Fig 20
Line spool cover
Line spool
grass ground