![background image](http://html2.mh-extra.com/html/yard-force/mb-400/mb-400_safety-instruction_3064959005.webp)
6
7
GB
GB
• Periodically visually inspect to see that the blades, blade
bolts and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to
preserve balance.
• Never leave the machine to operate unattended,
especially while other people such as children and pets
are in the area.
• Never use the machine to level out uneven patches.
• If the blades no longer cut correctly or if the motor is
overloaded, check all the parts of your equipment and
replace the worn parts. If a more extensive repair is
required, contact the customer service centre.
USE
• Do not put hands or feet near or under rotating parts.
• Never pick up or carry the machine while the motor is
running.
• Start Robotic Mower according to the instructions. When
the main power switch is in the ON position, make sure
you keep your hands and feet away from the rotating
• Remove the plug from the mains or remove the disabling
device:
– before clearing any blockages,
– before checking, cleaning or maintaining the machine,
– after striking a foreign object to inspect the machine for
damage,
– if the machine starts to vibrate abnormally, and to
check for damage before restarting,
blades.
GENERAL SAFETY WARNINGS
WARNING!
This machine can cause serious injuries. Follow
instructions below to reduce risk of accident and
injury.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
PREPAR
• Read the instructions carefully and make sure you
understand them fully. Be familiar with the controls and
ATION
the proper use of the machine.
• Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions
use the machine.
• Local regulations may restrict the age of the operator.
Children should be supervised to ensure that they do not
play with the appliance.
• The operator or user is responsible for accidents or
hazards occurring to other people or their property.
• Ensure the correct installation of the perimeter boundary
system as instructed.
• Periodically inspect the area where the machine is to be
used and remove all stones, sticks, wires, and other
debris which could cause damage to the machine or be
unsafe.