10
11
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. Hanging loop
2. LED working light
3. Red emergency warning light
4. Connectors
5. On/Off switch
6. Battery status indication
7. Magnet for mounting
8. Flash light& SOS signal light
Delivery contents (Fig. B)
Carefully unpack the appliance and check that it is complete. Dispose of the
packaging material correctly.
a. Jump start
b. Jump start cable
c. Charging cable (USB type)
d. Charging cable (Car cigarette lighter)
e. 12V output cable (Car cigarette lighter adaptor)
f. Instruction manual
OPERATION
Charging the device
The supplied battery is only partially charged. Before initial use, fully charge
battery.
After the first charge, we recommend fully discharging the battery and the
full charge/ discharge process to be repeated once or twice to "format" the
battery pack. Perform this charge as soon as possible after the battery has
been discharged and cooled.
To ensure long life of the battery, it must be maintained carefully
• The battery must be recharged
-
before using the machine for the first time after purchase
-
often, during use/season, usually after using the machine
-
before leaving the machine disused for a long period;
-
during long-term storage
-
before starting up the machine after a long period of disuse
• The discharged battery must be recharged as soon as possible. Let a hot
battery cartridge cool down before charging it
• Recharge the accumulators in time, before they are discharged fully,
otherwise the accumulators can be damaged permanently (irreversibly).
It is ideal to recharge the battery after each consumption
• The lithium-ion battery can be charged in any state of charge, and the
charging process can be interrupted at any time without harming the
battery (no memory effect)
• An unused battery loses capacity faster than a battery which is being
used.
• Charge the battery pack in a dry place with room temperature at
5 °C–40 °C.
• It is possible that the battery and/or charger can become moderately
warmer during charging, this is normal and doesn't indicate a fault
• Never cover the charger.
• Significantly reduced machine operating times and accelerated battery
charging times indicate that the battery has a reduced capacity and
should be replaced.
Caution!
Never charge the battery in an explosive or flammable
environment and near flammable liquids. Don't carry out charging on
a slightly flammable substrate (such as paper, textiles, etc.) when the
battery is removed. Never charge a battery which is visibly damaged
or its filling is leaking.