background image

22

23

ASSEMBLY

WARNING: 

If any parts are damaged or missing, do not operate this product until the parts 

are replaced. Use of this product with damaged or missing parts could result in serious 
personal injury.

WARNING: 

Do not attempt to modify this product or create accessories not recommended 

for use with this line trimmer. Any such alteration or modification is misuse and could result in 
a hazardous condition leading to possible serious personal injury.

WARNING: 

To prevent accidental starting that could cause serious personal injury, always 

remove the battery pack from the tool when assembling parts.

Attaching the guard (Fig. C)

Loosen and remove the two screws from the shaft base, align the guard mounting holes with 
the assembly holes and then lock the guard onto the shaft base with the two screws, together 
with two spring washers. Make sure the guard is fixed, any reverse fixing will cause great 
danger!

Installing the grass trimmer attachment shaft (Fig. D)

WARNING: 

Read the Instruction Manual for the attachment used on this power head and 

follow all warnings and instructions. Failure to follow all instructions may result in electric 
shock, fire and/or serious personal injury.

WARNING: 

Never install, remove, or adjust the attachment while power head is running. 

Failure to stop the motor can cause serious personal injury. Never operate power head 
without the attachment.

Note: 

Remove the battery if fitted before making any adjustments.

1. Loosen the coupling connector knob by rotating anticlockwise
2. Align the trimmer shaft arrow to the coupler connector position hole until release pin locks 
in position

NOTE:

 You may have to rotate the shaft for the pin to lock

3. Re-tighten the connector knob and make sure the shaft is fully secured in place

Installing auxiliary handle (Fig. E)

1. Uninstall four bolts on the Auxiliary handle.
2. Install the auxiliary handle on the Shaft and align the bottom handle clamp and assemble 
the bolts.
3. Tighten the bolts and make sure the handle is firmly secured in place.

OPERATION

Charging the battery pack 

NOTE:

 Remove the battery pack from the charger after it has been fully charged. 

NOTE: 

Battery should be fully charged before first use.

NOTE: 

Make sure the mains voltage is the same as rating label which is located on the 

charger. 
1.  Connect the charger to a power supply.  Red LED will light up. 
2.  To insert the battery pack into the charger, align the raised ribs of the battery pack with 

the grooves of the charger then push it in. (Fig. F)

3.  The red LED light of the charger will off and then the green light flashes during normal 

charging. 

4.  After charging is complete, the charger light will turn to a solid green light.
5.  Once the battery is fully charged ,remove the battery pack.

Power indicator (Fig. G)

This Li-Ion battery pack is equipped with a power indicator which is used to show the battery 
pack’s remaining charge. Press the power indicator button to check battery charge as picture 
showed. The indicator will stay lit for approximately 4 seconds.

To obtain the best life from the battery

1.  Never allow the battery to completely discharge before recharging. The battery pack 

should be placed on the charger whenever the battery pack is noticeably running down 
or the tool no longer performs a task it previously performed.

2.  Avoid conducting short charges. Make sure that the battery is fully charged each time by 

allowing the charger to complete its full charging cycle. 

3.  Avoid allowing loose items like screws or nails etc. to be stored with battery packs as 

these or similar items can short battery packs and cause a fire or explosion.

4.  Always unplug the charger when not in use and store in a dry and secure place. 
5.  Avoid charging or storing your battery in temperatures below 5°C and above 45°C. 
6.  After use, allow the battery pack to cool down for approximately 30 minutes before 

attempting to recharge.

Attaching/Detaching the battery pack

Fully charge before first use.

To Attach

Align the battery ribs with the mounting slots and press the battery pack down until you hear 
a “click”. (Fig. H)

To Detach

Depress the battery-release button and pull the battery pack out (Fig. I).

Summary of Contents for LT G33

















Reviews: