4
5
INTENDED USE
This pruner is designed for pruning branches and plants with a thickness up to 14 mm. It is
designed for domestic use and is not designed for commercial, trade or industrial use.
For safety reasons it is essential to read this entire instruction manual before initial operation
and to observe all the instructions inside.
This product is intended for private domestic use only, not for commercial trade use. It must
not be used for any purposes other than those described.
GENERAL SAFETY WARNINGS
WARNING:
Read all safety directions and instructions.
Omissions in the compliance with safety directions and
instructions can cause electrical shock, fire and/or severe
injuries.
Retain all safety directions and instructions for future use.
The term “Power Tools” used in the safety instructions
refers to mains-operated power tools (with power cord)
and to battery operated power tools (without power cord).
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas increase the chances of accidents.
2. Do not operate power tools in explosive atmospheres,
in the presence of flammable Iiquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
3. Keep children and bystanders away while operating
a power tool. Distractions can cause momentary loss
of control.
Electrical safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
GENERAL SAFETY WARNINGS
